ESR Eurosafe Imaging Free Webinar: Tips and Tricks in CT

Time: August 29, 2017, at 15:00 CEST (check time in your country)

Presenters: G. Frija, J. Santos

Registration: details to be announced soon

About the webinar:

EuroSafe Imaging is the European Society of Radiology’s flagship campaign to promote quality and safety in medical imaging. The mission of EuroSafe Imaging is to support and strengthen medical radiation protection across Europe following a holistic, inclusive approach. EuroSafe Imaging is pleased to hold this webinar on Tips and Tricks in CT together with the IAEA Radiation Protection of Patients unit.

The escalated use of computed tomography (CT) in medical imaging, both for diagnostic and therapeutic procedures, is significantly contributing to the increased patient exposure to ionising radiation and consequently to increased population dose, specially in developed countries.

It is well known that the exponential development of CT technology has contributed to the improvement of image quality and faster CT examinations in a relatively short period of time. However, if those technological advances are not used correctly the average radiation dose delivered per examination can increase and therefore not contributing for the benefits of patients.

The correct patient positioning at the gantry isocenter, the exposure parameter selection according to the patient size, the reduction of image acquisition series and the limitation of the scan length are some aspects, that will make a high impact in dose reduction when used properly. Nevertheless, it is important to take into account that CT dose values must be kept in levels that guaranty a “diagnostic image” according to the “clinical task” in order to respond to a given diagnostic question. The importance of this balance must be recognised by the “radiological family”, by integrating in daily practice a system to optimise CT procedures.

According to the recommendations, CT optimisation measures must be effectively used in daily practice in order to promote patient safety and develop a radiation protection culture.

Learning objectives:

  1. To become familiar with EuroSafe Imaging;
  2. To learn about the activities of EuroSafe Imaging and how to engage;
  3. To consolidate knowledge regarding current radiation dose levels used in CT;
  4. To understand dose optimisation measures using scanner technological features;
  5. To be aware of the impact of dose optimisation on patient dose and image quality;


-more info-

Pridruži se diskusiji na forumu